This is not a one off pickup.
We found a whole box of blemished KPH194 pickups that all have very similar blemishes. Some may have glue stains, some may have small scratches on the finish. Regardless, they are still quality pickups that just need a little TLC.
GF'Tron Lead Pickups with Alnico V Magnets.
Here is a modern wound set of humbucker pickups with "Just Enough" vintage jangle and twang added! These are just as loud as most modern pickups!
These use Alnico V magnets, Formvar 43 gauge coil wire, and correct Fillister head adjusting screws. Each pickup is vacuum wax potted with a beeswax/parrafin mixture. These are Kwikplug compatible and are four wire pickups so you can use a coil-split switch for single coil sounds as well. We've wound the Bridge to a rockin' 7.8k and the neck to 6.8K. Bridge position pickups are spaced at 50mm, neck pickups spaced at 48mm. These will mount exactly in vintage routs, and are a PERFECT fit for our GF'Tron cut bodies, bridges and pickguards.
We ship these with long wood screws and foam pads for mounting into a pre-cut rout, or choose our GFT01 Adapter bar to instantly convert these to "Humbucker" style mounting. This allows you to hang the pickup below any of our adapter rings, even mount them in the exact place of a humbucker pickup with our "LP" Style adapter rings.