One of the hardest guitars to rewire- Now DROP-IN EASY!
Here is a drop in harness for Epiphone Wildkat style guitars- These have an upper bout toggle, an upper bout Master Volume, volumes for each pickup and a master tone! Wow- complicated!
This harness is pre-wired with nothing to solder! Works with ANY GFS Kwikplug single coils!
Installation is simple- the Toggle plugs into the back of the neck Volume control, this connects to the master volume which then connects to the master tone which then connects to the output jack- Simple when you have the harness in front of you!
Includes nuts and washers for the pots, screws and black tip for the switch!
PRE-SOLDERED and a complete PLUG-In when using ANY of our Kwikplug Equipped Single Coil pickups.
This uses the classic USA style Toggle switch, 250K Audio volume pots and 250K Linear pots for tone control of both pickups. The tone caps are .047uf. An included crimp connector allows for simple SOLDERLESS installation of the ground wire that typically is connected to the bridge or stop tailpiece stud.. Plugs DIRECTLY into all Kwikplug Humbucker pickups!