FINALLY!! A real UPGRADE for Imported guitars with slighty thinner bodies- Like Squiers and most other imports!.
in Mexico, Made in China, Made in Korea etc.- You have the narrow 2
1/16" string spacing- That's fine but the SIX SCREW HOLES are also
narrow- The problem is ALL of the narrow spaced trems have crappy thin
zinc blocks, crappy fat "pot metal" trem arms and they don't upgrade
Well Guitarfetish to the rescue.
This is our own Proprietary trem- designed by us, made for us.
style bent steel saddles with stainless adjusting screws, hardened
steel baseplate, 6 hardened steel screws, Thin, vintage-style Hardened
steel tremolo arm, four springs and a trem claw- The WHOLE kit. But even
better a FULL SIZED, SOLID STEEL trem block.
The improvement in
tone is remarkable- better sustain, better bottom end response- the
guitar will sound fuller, louder and tighter.
We've upgraded all of the MIM strats in our soundroom and WOW- what a difference.
get a complete installation kit- All you need is a screwdriver. Just
measure your trem- if your screw holes are exactly 52.5mm from Low E
hole to high E hole- this is a DROP-IN.
Be sure to screw the trem arm all the way down into the arm hole on the block. The first point of resistance does not mean the arm is fully inserted into the block and could lead to the arm snapping at its weak joint. The threads should not be visible when the arm is inserted correctly.